Sewing Piping on Using a Buttonhole Foot/Turning a Corner with Piping

 

1. Mark seam allowance using a marking pen or pencil.

2. Place piping along marked seam allowance,clip piping exactly on the seam line.

3. Turn the piping at the corner and pinch the piping together with your
fingers,this will get the excess piping into the corner.

4. Sew piping using a buttonhole foot. DO NOT pivot at corner, sew straight
off the fabric.

5. Begin stitching your next seam from the edge and sew straight across and
off the edge, again do not pivot. Repeat for the last seam.
6. Grade seam, clip corners and turn. Press.

 

Home | How To | Smocking | Gallery | Forum.