|
Please Read - Make Sure the Pattern is Correct Before You Cut.
|
| Because of a couple of ladies having problems with printing the patterns
out the correct size, we researched what could be causing the problem. Depending
on what you use to read your PDF files it can make a difference and how
up to date the program may be. Please make sure that when you go to print
out the patterns these items are checked on your print screen.
Under Print Range have ALL
checked. To double check to see if it’s printed out the right size the small pattern that's enlarged to 150% should measure like this. With your measuring tape measure: width across the top of the pattern – 4 1/8”. Down left side of pattern length wise should measure: 4 5/8”. Across the bottom of the pattern is should measure: 5 2/8” + a tad more. The larger pattern enlarged 175% should measure like this with your measuring tape: width across the top of the pattern –4 6/8” width wise. Down left side of pattern length wise should measure: 5 3/8 + a tad more. Across the bottom of the pattern is should measure: 6” + to almost 6 1/8”.
If it doesn’t measure out right then, go back to the print page
and do the 3 steps above and again, and this time check the: Choose
Paper Source by PDF page size. Don’t click this the first time as
on my Adobe Reader it prints out perfect just doing the first three steps.
Depending on what you have to read your PDF files, this last step can
make a difference as it did for one lady. Make sure to measure you patterns
after printing to know for sure the pattern size is correct. If they print
out correct, just cut them out and your ready to use them to make your
pillowcase dresses. |